Kennedy Mechanical Puller 3 Jaw
  • Kennedy Mechanical Puller 3 Jaw

Kennedy Mechanical Puller 3 Jaw

KEN5033130K
Capacity

Mechanical Bearing Pullers

Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75, 100, 150 and 200mm.
All sizes have double-ended, adjustable, reversible legs and
can be used for internal and external applications.

Selection
Always use a three jaw puller whenever
possible. This produces better load
distribution across the jaws and easier
and safer removal of the part. Determine
what 'spread' is needed - this is the width
of the part to be removed. The reach
capacity is determined by the
depth of the part to be removed.

All pullers can be assembled for internal or external use.
3 Jaw Pullers - Supplied with both 3-legged yoke
3 Jaw - Internal Assembly
3 Jaw -External Assembly

Kennedy KEN5033130K MP375 3" Mechanical Puller 3 Jaw
Spread: 40-75mm
Reach: 60mm
Thread Length: 125mm

Kennedy KEN5033140K MP3100 4" Mechanical Puller 3 Jaw
Spread: 50-100mm
Reach: 120mm
Thread Length: 160mm

Kennedy KEN5033160K MP3150 6" Mechanical Puller 3 Jaw
Spread: 60-150mm
Reach: 120mm
Thread Length: 240mm

Kennedy KEN5033180K MP3200 8" Mechanical Puller 3 Jaw
Spread: 80-200mm
Reach: 175mm
Thread Length: 335mm
KEN5033130K

Data sheet

Width
90mm
Length
161mm
Depth
72mm
Weight
588g