Kennedy KEN5033030K 3" Mechanical Puller 2 Jaw
  • Kennedy KEN5033030K 3" Mechanical Puller 2 Jaw

Kennedy Mechanical Puller 2 jaw

KEN5033030K
Capacity

Mechanical Bearing Pullers

Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external
applications.
Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what 'spread' is needed - this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.

All pullers can be assembled for internal or external use.
2 Jaw Pullers - Supplied with both 2-legged yoke
2 Jaw -Internal Assembly
2 Jaw -External Assembly

Kennedy KEN5033030K MP275 3" Mechanical Puller 2 Jaw
Spread: 40-75mm
Reach: 60mm
Thread Length: 125mm

Kennedy KEN5033040K MP2100 4" Mechanical Puller 2 Jaw
Spread: 50-100mm
Reach: 70mm
Thread Length: 160mm

Kennedy KEN5033060K MP2200 6" Mechanical Puller 2 Jaw
Spread: 60-150mm
Reach: 120mm
Thread Length: 240mm

Kennedy KEN5033080K MP2150 8" Mechanical Puller 2 Jaw
Spread: 80-200mm
Reach: 175mm
Thread Length: 335mm

KEN5033030K

Data sheet

Width
117mm
Length
127mm
Depth
30mm
Weight
439g