Kennedy KEN5033230K 3" 2/3 Jaw Double End Mechanical Puller
  • Kennedy KEN5033230K 3" 2/3 Jaw Double End Mechanical Puller

Kennedy 2/3 Jaw Double End Mechanical Puller

RM139.30
Tax excluded
KEN5033230K
Capacity
Quantity
In Stock

 

Security policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

Mechanical Bearing Pullers

Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75, 100, 150 and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external applications.
Selection
Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what 'spread' is needed - this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.

All pullers can be assembled for internal or external use.

Combined 2+3 Jaw Pullers -
'4-in-1'
Supplied with 2 and 3-legged yokes and 3 leg assemblies - allowing the pullers to be configured in 2 jaw internal / external or 3 jaw
internal / external assemblies.

Kennedy KEN5033230K 3" 2/3 Jaw Double End Mechanical Puller
Spread: 41-53mm
Reach: 75mm
Thread Length: 80mm

Kennedy KEN5033240K 4" 2/3 Jaw Double End Mechanical Puller
Spread: 40-87mm
Reach: 100mm
Thread Length: 100mm

Kennedy KEN5033260K 6" 2/3 Jaw Double End Mechanical Puller
Spread: 60-139mm
Reach: 150mm
Thread Length: 165mm

Kennedy KEN5033280K 8" 2/3 Jaw Double End Mechanical Puller
Spread: 80-194mm
Reach: 165mm
Thread Length: 240mm
KEN5033230K

Data sheet

Width
195mm
Length
310mm
Depth
25mm
Weight
735g